Guzzler, Tehkan ----------------- COMPONENT | SOLDER ------------------------------------------- 2P.Left | 1 | A | 2P.Right 2P.Down | 2 | B | 2P.Up | 3 | C | 2P.Discharge | 4 | D | 1P.Left | 5 | E | 1P.Right 1P.Down | 6 | F | 1P.Up | 7 | G | 1P.Discharge | 8 | H | 2P.Start | 9 | I | 1P.Start Coin A |10 | J | Coin B GND |11 | K | GND GND |12 | L | GND GND |13 | M | GND Spaker |14 | N | Speaker +12V |15 | O | +12V |16 | P | +5V |17 | Q | +5V +5V |18 | R | +5V TV 6 P Connector ---------------- 1 Blue 2 Green 3 Red 4 GND 5 Sync 6 GND Dip sw. A --------- 1 2 3 4 5 6 7 8 ----------------------------------------------- Coin A - - 1Coin/1Play + - 1Coin/2Play - + 1Coin/3Play + + 1Coin/6Play Coin B - - 1Coin/1Play + - 2Coin/1Play - + 1Coin/2Play + + 1Coin/3Play Bonus AT - - 30000, 100000 + - 20000, 50000 - + 30000 Only + + No Bonus Guzzlers - - 3 + - 4 - + 5 + + Free Play Dip sw.B -------- 1 2 3 4 ----------------------------------------------------------- Type - Table + Upright Registered Letters - 10 Letters + 3 Letters Difficulty - - Easy + - Normal - + Hard + + Hardest -------------------------------------------------------------------------- -------------------------------------------------------------------------- Note: ----- 1) Sound amplifier for Guzzler PCB is the B.T.L. Both sound output lines can lead any point but GND. 2) Picture might get snow noise at max sound volume. In that case please try following modification.